Leydenbrewery

Our standard 15 barrel brewhouse offering includes a 15 barrel steam fired brew kettle matched up with a 30 barrel hot liquor tank and 15 barrel mash tun. The 30 barrel HLT allows the brewer to make double batches in a day to increase production. The brew kettle has tangential side port for optional whirlpool process following the boil. The vessels are oversized so the brewer can deliver a full 15 barrels of wort to the fermentation vessels. Stainless steel dimple jackets are utilized on the vessels to maximize steam energy transfer into the wort, decreasing wait time before boiling. All three vessels are fitted with internal clean in place ball system.

Mash Tun

• Effective volume: 10 BBL
• Milled plate false bottom
• Rake motor: 2.2 Kw SEW Eurodrive Rake Motor, variable speed with reverse
• Grain out Paddles: Integral to the rake, activate in reverse direction
• Dedicated sanitary centrifugal pump, variable speed control
• Glass Grant and underlet capability
• Inner container: SUS304,thickness 3mm, 2B finished
• Outer Shell: SU304, thickness 2mm, brushed finish
• Insulation material: polyurethane, thickness: 80mm
• Grain out side mandoor with removable chute
• Vorlauf, Sparge Ring, strike water fill port
• Oversized glass window mandoor with interior light
• Necessary fittings and valves, pipeline, dual CIP balls

Kettle

• Effective volume: 10 BBL. 20% headspace
• Dedicated sanitary centrifugal pump, variable speed control
• Inner container: SUS304,thickness 3mm, 2B finished
• Outer shell: SU304, thickness 2mm, brushed finish
• Insulation Material: polyurethane, thickness: 80mm / rock wool
• Heating method: Direct fire, fully modulating Economite Midco 4400DS HTD forced air burner.
• Oversized glass window manway with interior light
• Steam Vent: Removable condensing steam vent
• Necessary fittings and valves, pipeline, CIP wash ball
• Rotatable racking arm

Working Platform / Heat Exchanger

• Large working platform
• All stainless steel anti slip design
• Built in work shelf
• Spray down hose location
• Full handrails
• Heat Exchanger: SU304 plate and frame 8 sq meter surface area

Control Panel

• Centralized control panel
• Temperature displays for all critical process
• VFD controls for Pumps and rake
• Burner controls
• Lighting controls
• Integrated circuit breakers

Utility Connections

• Electricity: 220v 3-Phase for mash rake, wort pumps, and main control panel. 30 Amp Breaker Required.
• Water: 1″ NPT female inlets at Brew House for hot and cold water sources.
• Gas Pipe Size: Minimum 3/4″, larger sizes may be required due to distance from meter and pressure drop.
• Gas pressure required: 7″ W.C (water column) minimum 14″ W.C. maximum at burner location.

Recommended Equipment (NOT INCLUDED)

• Noritz NCC1991 Condensing Commercial Tankless Water Heater – 199,000 BTUs, and 94% efficient. Temperature output up to 185 degrees. CA Low NOx approved. Multi-unit scalability for increased flow rates.

Brief introduction of 1000L beer making machine:

1.The 1000L beer making machine contains four functions,mash,lauter,boiling and whirlpool.You can combine the functions in two tanks or three tanks freely.And we usually add a hot liquid tank and cold water tank to improving mashing efficiency.

2.Heating method,there are electric heating,steam heating and gas heating.For 1000L beer making machine,we often recommend steam heating.So it will need a steam boiler to generate steam,we can choose oil boiler,gas boiler or electric boiler according to real condition.

3.The 1000L beer making machine adopt automatic spent grain removable system.It will have separate control panel to control the system.Beside that,the motor and pumps are controlled by VFD,most important,we adopt famous brand, the brand is ABB or Siemens.

• Useful capacity:14hL,total capacity:10hL
•  Heavy duty false botton with pillar support system
•  Fully insulated vessel
•  SS CIP High-flow rotary spray ball with 360 degree of coverage
•  Interior light
•  Sparge ring assembly
•  Top mahway(tempered glass)
•  Side manway for spent grain out
•  Gap of the sieve is 0.7mm
•  automatic spent grain removable system

 Brief introduction of 1000L beer production line:

1.The 1000L beer production line contains four functions,mash,lauter,boiling and whirlpool.You can combine the functions in two tanks or three tanks freely.And we usually add a hot liquid tank and cold water tank to improving mashing efficiency.

2.Heating method,there are electric heating,steam heating and gas heating.For 1000L beer production line,we often recommend steam heating.So it will need a steam boiler to generate steam,we can choose oil boiler,gas boiler or electric boiler according to real condition.

3.The 1000L beer production line adopt automatic spent grain removable system.It will have separate control panel to control the system.Beside that,the motor and pumps are controlled by VFD,most important,we adopt famous brand, the brand is ABB or Siemens.

• Useful capacity:14hL,total capacity:10hL
•  Heavy duty false botton with pillar support system
•  Fully insulated vessel
•  SS CIP High-flow rotary spray ball with 360 degree of coverage
•  Interior light
•  Sparge ring assembly
•  Top mahway(tempered glass)
•  Side manway for spent grain out
•  Gap of the sieve is 0.7mm
•  automatic spent grain removable system